For your mounting needs, we recommend using Zip Dry Glue. It sets in about 10 seconds, giving you time to adjust and center your piece. Apply only a thin, continuous bead of glue around the border—using too much can cause it to seep through the paper and damage your project. Practice first to get the right amount!
Tips: When cutting the nozzle tip, clip just enough for a small amount of glue to pass through. If any glue seeps out from the edges, wait for it to dry and then gently rub it away with your fingertip. When used properly, Zip Dry Glue will not cause crinkling or buckling of the paper. Always recap the glue after use to prevent it from drying out—otherwise, you'll need to re-cut the tip every time.
One bottle should cover between 75- 100 mounts, depending on the size.
CLICK HERE to find Zip Dry Glue.
Comments
0 comments
Article is closed for comments.